US federal rule
Safety Standard for Automatic Residential Garage Door Operators
16 CFR Part 1211
What it covers
This federal rule makes entrapment protection mandatory for residential garage door operators sold in the US. It builds on UL 325: an operator must reverse when it meets an obstruction and must have a secondary protection means, such as photo eyes or an edge sensor. The rule refers to UL 325 for many detailed requirements, which is why US garage door operators are normally certified to UL 325 by a nationally recognised testing laboratory.
- Official number
- 16 CFR Part 1211
- Kind
- US federal rule
- Issued by
- U.S. Consumer Product Safety Commission
- Regions
- United States
- Applies to
- Door and gate operators
- Applies from
- 1993-01-01
- Official text
- ecfr.gov
Key dates
Standards it relies on
Certification programs
- UL certification A UL Listing means UL Solutions evaluated samples of the product against the applicable safety standard and carries out follow-up inspections of production; a UL Recognized Component mark covers a part intended for use inside another product. For door, drapery, gate, louver and window operators the product standard is UL 325. The C-UL mark covers Canadian requirements and the C-UL-US mark covers both the United States and Canada. No U.S. federal rule requires UL itself for these products, but electrical codes, inspectors, employers and retailers commonly require a listing by a Nationally Recognized Testing Laboratory (NRTL); UL Solutions is one of several NRTLs.
Market-access guides
Sources
This is our summary, not the legal text and not legal advice. Check the official text before you rely on it.
Need help with certification?
Tell us your product, the market and where you are with 16 CFR Part 1211. We read every request and reply by email. Ask about certification →