Skip to main contentOpenAxia
CompareFor manufacturers

Nice Era Inn Edge BD E EDGE SI 332 DC BD

Part no. E EDGE SI 332 DC BD

Also written as EEDGESI332DCBD

by Nice logoNice

Era Inn Edge BD E EDGE SI 332 DC BD is a tubular motor made by Nice.

Sources: 2 manufacturer documents · Last verified 2026-11-02 · How we collect data →

Ø35 mm472 mm
Schematic generated by OpenAxia from published dimensions. Not to scale.

Overview

Key specs

Torque
3 Nm
Rated speed
32 rpm
Motor diameter
35 mm Derived
Rated voltage
24 V
IP rating
IP30

Fit and application

Category
Tubular Motor
Maximum load
12 kg

Era Inn Edge BD E EDGE SI 332 DC BD is a tubular motor made by Nice. Sourced specifications: torque 3 Nm; rated speed 32 rpm; motor diameter 35 mm; rated voltage 24 V. Among 1474 listed tubular motors products with a sourced torque, most values range from 2 to 140 Nm; this product's 3 Nm is in the lower quartile. Among 1279 listed tubular motors products with a sourced rated speed, most values range from 9 to 35 rpm; this product's 32 rpm is in the upper quartile.

Composed from 9 sourced facts
  • Era Inn Edge BD E EDGE SI 332 DC BD — Product record
  • Nice — Company record
  • Tubular motors — Category tree
  • Torque: 3 Nm — Nice S.p.A. PDF catalogue nice_sun_shading_solutions_catalogue_en.pdf
  • Rated speed: 32 rpm — Nice S.p.A. PDF catalogue nice_sun_shading_solutions_catalogue_en.pdf
  • Motor diameter: 35 mm — Tubular diameter derivation tdia-nice-era-size-v1
  • Rated voltage: 24 V — Nice S.p.A. PDF catalogue nice_sun_shading_solutions_catalogue_en.pdf
  • Among 1474 listed tubular motors products with a sourced torque, most values range from 2 to 140 Nm; this product's 3 Nm is in the lower quartile. — Catalogue statistics
  • Among 1279 listed tubular motors products with a sourced rated speed, most values range from 9 to 35 rpm; this product's 32 rpm is in the upper quartile. — Catalogue statistics

Specifications

Identity & lineage

Part number
E EDGE SI 332 DC BD

Electrical

Electrical specifications
SpecificationValue
Rated voltage24 V
Power supply typeDC
Rated power input36 W
Standby power< 0.5 W
Rated current1.5 A

Drive performance

Drive performance specifications
SpecificationValue
Rated torque3 Nm
Rated speed32 rpm
Speed range (min)16 rpm
Speed range (max)48 rpm
Measurement noteIf the set speed is higher than the rated speed, motor torque is automatically reduced by 50%. contact input
Short-time duty (S2)6 min
Max load12 kg
Measurement noteIndicative value calculated with a 40 mm diameter roller. The actual value may vary depending on the specific installation.

Dimensions & mounting

Dimensions & mounting specifications
SpecificationValue
Motor diameter35 mm Derived
Measurement notederived from model name (tdia-nice-era-size-v1)
Overall length472 mm
Weight1.1 kg

Limits & protection

Limits & protection specifications
SpecificationValue
Limit range< 150 turns

Environment & protection

Environment & protection specifications
SpecificationValue
IP ratingIP30
Operating temp. (min)0 °C
Operating temp. (max)60 °C
Noise level35 dB(A)
Measurement notevendor-stated dBA); no measurement standard stated; Noise levels have been measured in accordance with EN ISO 3745, EN ISO 3746 and EN 60704-1, expressing the sound power emitted by the source in dBA.

Source: Nice S.p.A. PDF catalogue (Manufacturer-stated), Tubular diameter derivation tdia-nice-era-size-v1 — Derived (model name). Last checked 2026-11-02. All sources (2) · Learn more about this data

Replacements

Current models named as replacements by the manufacturer, or with similar published specifications.

Replacement suggestions compare published specifications. They do not guarantee fit or compatibility. Check the motor head, crown and drive adapters, brackets, wiring and remote pairing with the manufacturer or a qualified installer before ordering. Mains-powered motors must be connected by a qualified electrician.

Same brand, equivalent specification

Current models of the same brand, from another series, whose published values pass the tolerance table.

OpenAxia comparison of published specifications — not a manufacturer statement

Match with changesWithin the hard tolerances, but at least one difference has a consequence, such as new remotes or a different way of setting limits. Each difference is listed.

  • Nice Era Inn Smart E SMART SI 332 DC · Nice

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Ø35 mm (same class) (from the model name)
    • Torque 3 Nm (same)
    • Speed 32 rpm (same)
    • 24 V (same)
    • Power supply DC (same)
    • Length 472 mm
    • Protection IP30
    Differences
    • Control system not confirmed
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

58 other motors could not be checked (missing diameter, supply voltage). See them in the catalog →

29 other motors were left out: outside a hard limit of the tolerance table (for example less torque or another diameter) or no longer listed by the manufacturer.

Open the replacement finder

Cross-brand alternatives (spec-equivalent)

Same brand and category
ModelTorqueSpeedDiameter
Nice ERA INN EDGE S LI-ION2 Nm (−33%)28 rpm (−13%)35 mm (same)
Nice ERA INN EDGE S AC E EDGE SI 332 AC3 Nm (same)32 rpm (same)35 mm (same)
Nice ERA INN EDGE S DC E EDGE SI 332 DC3 Nm (same)32 rpm (same)35 mm (same)
Nice ERA INN EDGE M AC E EDGE MI 332 AC3 Nm (same)32 rpm (same)45 mm (+29%)
Nice ERA INN EDGE M DC E EDGE MI 332 DC3 Nm (same)32 rpm (same)45 mm (+29%)
Nice ERA INN SMART M AC E SMART MI 332 AC3 Nm (same)32 rpm (same)45 mm (+29%)
Nice ERA INN SMART M DC E SMART MI 332 DC3 Nm (same)32 rpm (same)45 mm (+29%)
Nice Era Inn Action E ACTION SI 332 AC3 Nm (same)32 rpm (same)35 mm (same)
Other sizes in this series
ModelTorqueSpeedDiameterRated voltage
Nice For interior roller blinds, with integrated rechargea- ble battery, electronic limit switch and built-in radio E EDGE SI 228DC BD2 Nm (−33%)28 rpm (−13%)35 mm (same)—
Nice Era Inn Edge BD E EDGE SI 332 AC BD3 Nm (same)32 rpm (same)35 mm (same)—
Nice Era Inn Edge BD E EDGE SI 620 AC BD6 Nm (+100%)20 rpm (−38%)35 mm (same)—
Nice Era Inn Edge BD E EDGE SI 620 DC BD6 Nm (+100%)20 rpm (−38%)35 mm (same)24 V (same)
Nice Era Inn Edge BD E EDGE SI 1012 AC BD10 Nm (+233%)12 rpm (−63%)35 mm (same)—
Nice Era Inn Edge BD E EDGE SI 1012 DC BD10 Nm (+233%)12 rpm (−63%)35 mm (same)24 V (same)

Compare systems & lineage

Sources

  1. ↑Nice S.p.A. PDF catalogueniceforyou.comRated voltage: Power supply (VDC): 24 [E EDGE SI 332 DC BD] (p. 88)Manufacturer-stated · Observed 2026-10-01 · Retrieved 2026-10-01 · Public web pageUsed for: Rated voltage, Power supply type, Rated power input, Standby power, Rated current, Rated torque, Rated speed, Speed range (min), Speed range (max), Short-time duty (S2), Max load, Overall length, Weight, Limit range, IP rating, Operating temp. (min), Operating temp. (max), Noise level
  2. ↑Tubular diameter derivation tdia-nice-era-size-v1niceforyou.com[tdia-nice-era-size-v1] Ø 35 mm from "E EDGE SI 332". Nice Era Star T manual §3.1: motors that are size "S" (Ø = 35 mm) … size "M" (Ø = 45 mm) … size "L" (Ø = 58 mm). Nice Sun Shading catalogue 2026 p70: "ERA INN S Ø 35 mm", "ERA INN M Ø 45 mm".Derived (model name) · Observed 2026-10-09 · Retrieved 2026-10-09 · Public web pageUsed for: Motor diameter

Take the next step

Compare this model with others, or browse the rest of the catalogue.

Browse all productsCompare brands

Explore more

Compiled from manufacturer publications and public registries. Confirm critical specifications with the manufacturer before ordering.

Brand names and logos are trademarks of their respective owners; used for identification only. Request removal

See something wrong? Report an error

Are you the manufacturer? Claim this brand to update this product.