Skip to main contentOpenAxia
CompareFor manufacturers

Used for: Roller shutters · Awnings

Geiger Antriebstechnik POWER.TECline Spindle NHK · 80 Nm · 12 rpm

Part no. GB59M-80/12

Also written as GB59M8012

by Geiger Antriebstechnik logoGeiger Antriebstechnik

GB59M-80/12 is a tubular motor made by Geiger Antriebstechnik.

Sources: 2 manufacturer documents · Last verified 2026-10-01 · How we collect data →

Ø59 mm678 mm
Schematic generated by OpenAxia from published dimensions. Not to scale.

Overview

Key specs

Torque
80 Nm
Rated speed
12 rpm
Motor diameter
59 mm
Rated voltage
230 V
IP rating
IP44

Fit and application

Category
Tubular Motor

GB59M-80/12 is a tubular motor made by Geiger Antriebstechnik. Sourced specifications: torque 80 Nm; rated speed 12 rpm; motor diameter 59 mm; rated voltage 230 V. Among 1474 listed tubular motors products with a sourced torque, most values range from 2 to 140 Nm; this product's 80 Nm is in the upper quartile. Among 1279 listed tubular motors products with a sourced rated speed, most values range from 9 to 35 rpm; this product's 12 rpm is in the lower quartile.

Composed from 9 sourced facts
  • GB59M-80/12 — Product record
  • Geiger Antriebstechnik — Company record
  • Tubular motors — Category tree
  • Torque: 80 Nm — Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf
  • Rated speed: 12 rpm — Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf
  • Motor diameter: 59 mm — Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf
  • Rated voltage: 230 V — Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf
  • Among 1474 listed tubular motors products with a sourced torque, most values range from 2 to 140 Nm; this product's 80 Nm is in the upper quartile. — Catalogue statistics
  • Among 1279 listed tubular motors products with a sourced rated speed, most values range from 9 to 35 rpm; this product's 12 rpm is in the lower quartile. — Catalogue statistics

Specifications

Identity & lineage

Identity & lineage specifications
SpecificationValue
Series / product linePOWER.TECline Spindle NHK
Part number
GB59M-80/12
Product page
Manufacturer page ↗
Show 7 fields not published by the manufacturer
Identity & lineage: fields not published
SpecificationValue
Variant suffix—
GTIN / EAN—
Lifecycle status (manufacturer)—
Replaces part number—
Replaces model—
White-label of—
Market variant—

Electrical

Electrical specifications
SpecificationValue
Rated voltage230 V
Mains frequency50 Hz
Power supply typeAC mains
Supply rating (as stated)230 V~/50 Hz
Rated power input270 W
Rated current1.2 A
Power factor (cos φ)> 0.95
Inrush current factor1.2 x
Cable connectionFixed cable
Show 7 fields not published by the manufacturer
Electrical: fields not published
SpecificationValue
Supply voltage (min)—
Supply voltage (max)—
Standby power—
Protection class (electrical)—
Cable type—
Cable brand—
Cable length—

Drive performance

Drive performance specifications
SpecificationValue
Rated torque80 Nm
Rated speed12 rpm
Short-time duty (S2)4 min
Duty typeS2
Show 5 fields not published by the manufacturer
Drive performance: fields not published
SpecificationValue
Peak torque—
Speed range (min)—
Speed range (max)—
Max load—
Rated life—

Dimensions & mounting

Dimensions & mounting specifications
SpecificationValue
Motor diameter59 mm
Overall length678 mm
Weight≈ 6.4 kg
Show 5 fields not published by the manufacturer
Dimensions & mounting: fields not published
SpecificationValue
Fits tube diameter—
Compatible tube profiles—
Motor head type—
Mounting side—
Max shade width—

Limits & protection

Limits & protection specifications
SpecificationValue
Limit settingMechanical
Measurement noteObere Endlage: Auf Position; Untere Endlage: Auf Position
Limit range24 turns
Obstacle detection No
Show 5 fields not published by the manufacturer
Limits & protection: fields not published
SpecificationValue
Intermediate positions—
Manual override—
Soft start / soft stop—
Thermal protection—
Noiseless soft brake—

Control & communication

Show 11 fields not published by the manufacturer
Control & communication: fields not published
SpecificationValue
Control protocol—
Control interface (as stated)—
Radio frequency—
Modulation—
Radio range—
Two-way feedback—
Max paired transmitters—
Wired inputs—
Works with—
Sensor inputs—
Timer / astro—

Environment & protection

Environment & protection specifications
SpecificationValue
IP ratingIP44
Noise level48 dB(A)
Measurement notestated as dB(A)
Show 5 fields not published by the manufacturer
Environment & protection: fields not published
SpecificationValue
Operating temp. (min)—
Operating temp. (max)—
Ambient humidity—
Storage temp. (min)—
Storage temp. (max)—

Application

Application specifications
SpecificationValue
ApplicationsAwning, Roller shutter

Compliance & declarations

Show 3 fields not published by the manufacturer
Compliance & declarations: fields not published
SpecificationValue
Marks stated by vendor—
Declared standards—
Carbon footprint (PEP/EPD)—

Appearance

Show 1 field not published by the manufacturer
Appearance: fields not published
SpecificationValue
Colour / finish—

Source: Geiger Antriebstechnik manufacturer site (Manufacturer-stated), Geiger Antriebstechnik PDF catalogue (Manufacturer-stated). Last checked 2026-10-01. All sources (2) · Learn more about this data

Documents

Replacements

Current models named as replacements by the manufacturer, or with similar published specifications.

Replacement suggestions compare published specifications. They do not guarantee fit or compatibility. Check the motor head, crown and drive adapters, brackets, wiring and remote pairing with the manufacturer or a qualified installer before ordering. Mains-powered motors must be connected by a qualified electrician.

Same series, current models

Current models of the same series whose published values pass the tolerance table.

OpenAxia comparison of published specifications — not a manufacturer statement

Match with changesWithin the hard tolerances, but at least one difference has a consequence, such as new remotes or a different way of setting limits. Each difference is listed.

  • Geiger Antriebstechnik POWER.TECline Spindle NHK · 100 Nm · 12 rpm · Geiger Antriebstechnik

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Used for Awning, Roller shutter (same)
    • Ø59 mm (same class)
    • Torque 100 Nm (+25%)
    • Speed 12 rpm (same)
    • 230 V (same)
    • Power supply AC mains (same)
    • Mains 50 Hz (same)
    • Limits: Mechanical (same)
    • Length 678 mm
    • Limit turns 24
    • Protection IP44
    Differences
    • Control system not confirmed
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

  • Geiger Antriebstechnik POWER.TECline Spindle NHK · 120 Nm · 9 rpm · Geiger Antriebstechnik

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Used for Awning, Roller shutter (same)
    • Ø59 mm (same class)
    • 230 V (same)
    • Power supply AC mains (same)
    • Mains 50 Hz (same)
    • Limits: Mechanical (same)
    • Limit turns 24
    • Protection IP44
    Differences
    • Oversized: 120 Nm (+50%) is more torque than needed — check that the tube, crown and end stops can take it
    • Opens/closes slower (≈25%)
    • Control system not confirmed
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

Same brand, equivalent specification

Current models of the same brand, from another series, whose published values pass the tolerance table.

OpenAxia comparison of published specifications — not a manufacturer statement

Match with changesWithin the hard tolerances, but at least one difference has a consequence, such as new remotes or a different way of setting limits. Each difference is listed.

  • Geiger Antriebstechnik POWER.TECline SpindleRadio NHK · 80 Nm · 12 rpm · Geiger Antriebstechnik

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Used for Awning, Roller shutter (same)
    • Ø59 mm (same class)
    • Torque 80 Nm (same)
    • Speed 12 rpm (same)
    • 230 V (same)
    • Power supply AC mains (same)
    • Mains 50 Hz (same)
    • Limits: Mechanical (same)
    • Limit turns 24
    • Protection IP44
    Differences
    • Control system not confirmed
    • 120 mm longer: check the space between brackets
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

  • Geiger Antriebstechnik POWER.TECline SpindleRadio NHK · 100 Nm · 12 rpm · Geiger Antriebstechnik

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Used for Awning, Roller shutter (same)
    • Ø59 mm (same class)
    • Torque 100 Nm (+25%)
    • Speed 12 rpm (same)
    • 230 V (same)
    • Power supply AC mains (same)
    • Mains 50 Hz (same)
    • Limits: Mechanical (same)
    • Limit turns 24
    • Protection IP44
    Differences
    • Control system not confirmed
    • 120 mm longer: check the space between brackets
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

  • Geiger Antriebstechnik POWER.TECline SpindleRadio NHK · 120 Nm · 9 rpm · Geiger Antriebstechnik

    Match with changes

    OpenAxia comparison of published specifications — not a manufacturer statement

    Matched
    • Same product type (tubular motor)
    • Used for Awning, Roller shutter (same)
    • Ø59 mm (same class)
    • 230 V (same)
    • Power supply AC mains (same)
    • Mains 50 Hz (same)
    • Limits: Mechanical (same)
    • Limit turns 24
    • Protection IP44
    Differences
    • Oversized: 120 Nm (+50%) is more torque than needed — check that the tube, crown and end stops can take it
    • Opens/closes slower (≈25%)
    • Control system not confirmed
    Not checked
    • crown & drive adapters and motor head
    • brackets
    • remote pairing
    • wiring
    Report a problem with this match

2 other motors were left out: outside a hard limit of the tolerance table (for example less torque or another diameter) or no longer listed by the manufacturer.

Open the replacement finder

Cross-brand alternatives (spec-equivalent)

Comparable models from other brands
ModelBrandTorqueSpeedDiameterRated voltage
Wistar motor WSEB60 · 80 Nm · 12 rpmWistar motor80 Nm (same)12 rpm (same)59 mm (same)230 V (same)
Wistar motor WSER60 · 80 Nm · 12 rpmWistar motor80 Nm (same)12 rpm (same)59 mm (same)230 V (same)
Gaposa XQ60 · 80 Nm · 12 rpmGaposa80 Nm (same)12 rpm (same)58 mm (−2%)230 V (same)
Nice 230 Vac E L 8012Nice80 Nm (same)12 rpm (same)58 mm (−2%)230 V (same)
Nice 230 Vac E PLUS LH 8012Nice80 Nm (same)12 rpm (same)58 mm (−2%)230 V (same)

Matched on torque, speed and diameter within 25%. Methodology →

Same brand and category
ModelTorqueSpeedDiameterRated voltage
Geiger Antriebstechnik SOLIDline ZIP-Perfection · 3 Nm · 26 rpm3 Nm (−96%)26 rpm (+117%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SOLIDline ZIP Radio · 3 Nm · 26 rpm3 Nm (−96%)26 rpm (+117%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SLIM.TECline Spindle · 6 Nm · 26 rpm6 Nm (−93%)26 rpm (+117%)35 mm (−41%)230 V (same)
Geiger Antriebstechnik SOLIDline Touch · 6 Nm · 16 rpm6 Nm (−93%)16 rpm (+33%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SOLIDline SoftPlus-Qi · 6 Nm · 16 rpm6 Nm (−93%)16 rpm (+33%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SOLIDline Qi Radio · 6 Nm · 16 rpm6 Nm (−93%)16 rpm (+33%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SOLIDline ZIP-Perfection · 6 Nm · 16 rpm6 Nm (−93%)16 rpm (+33%)45 mm (−24%)230 V (same)
Geiger Antriebstechnik SOLIDline ZIP Radio · 6 Nm · 16 rpm6 Nm (−93%)16 rpm (+33%)45 mm (−24%)230 V (same)
Other sizes in this series
ModelTorqueSpeedDiameterRated voltage
Geiger Antriebstechnik POWER.TECline Spindle NHK · 140 Nm · 9 rpm140 Nm (+75%)9 rpm (−25%)59 mm (same)230 V (same)

Compare systems & lineage

Sources

  1. ↑Geiger Antriebstechnik manufacturer site (product catalog)geiger.deSeries / product line: POWER.TECline Spindle NHKManufacturer-stated · Observed 2026-10-01 · Retrieved 2026-09-23 · Public web pageUsed for: Series / product line, Supply rating (as stated), Cable connection, Limit setting, Obstacle detection, Applications
  2. ↑Geiger Antriebstechnik PDF cataloguegeiger.deRated voltage: Spannung: 230V~/50 Hz [GB59M-80/12] (p. 51)Manufacturer-stated · Observed 2026-10-01 · Retrieved 2026-10-01 · Public web pageUsed for: Rated voltage, Mains frequency, Power supply type, Rated power input, Rated current, Power factor (cos φ), Inrush current factor, Rated torque, Rated speed, Short-time duty (S2), Duty type, Motor diameter, Overall length, Weight, Limit range, IP rating, Noise level

Take the next step

Compare this model with others, or browse the rest of the catalogue.

Compare with alternativesCompare brands

Explore more

Compiled from manufacturer publications and public registries. Confirm critical specifications with the manufacturer before ordering.

Brand names and logos are trademarks of their respective owners; used for identification only. Request removal

See something wrong? Report an error

Are you the manufacturer? Claim this brand to update this product.