What supply voltage and frequency does each use?

Rated voltage — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 230 V; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 230 V. Mains frequency — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 50 Hz; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 50 Hz. Power supply type — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: AC mains; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: AC mains.

Which tube diameters do they fit?

Motor diameter — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 45 mm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 45 mm.

What torque and speed is each rated for?

Rated torque — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 10 Nm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 20 Nm. Rated speed — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 15 rpm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 15 rpm.

What protocols and control options does each support?

Limit setting — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: Mechanical; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: Mechanical.

Geiger Antriebstechnik PRO.TECline Spindle: 105 W vs 140 W

Rated power input — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 105 W^{[2; 2026-10-01]}; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 140 W^{[2; 2026-10-01]}.

Rated current — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 0.47 A^{[2; 2026-10-01]}; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 0.63 A^{[2; 2026-10-01]}.

Rated torque — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm^{[2; 2026-10-01]} · 15 rpm: 10 Nm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm^{[2; 2026-10-01]} · 15 rpm: 20 Nm.

Last verified: 2026-10-01

When to choose Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm

For 230 V^{[2; 2026-10-01]} / 50 Hz^{[2; 2026-10-01]} mains.
For the stated supply type: AC mains^{[2; 2026-10-01]}.
For the stated diameter: 45 mm^{[2; 2026-10-01]}.
For a rated torque of 10 Nm^{[2; 2026-10-01]}.

When to choose Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm

For 230 V^{[2; 2026-10-01]} / 50 Hz^{[2; 2026-10-01]} mains.
For the stated supply type: AC mains^{[2; 2026-10-01]}.
For the stated diameter: 45 mm^{[2; 2026-10-01]}.
For a rated torque of 20 Nm^{[2; 2026-10-01]}.

Verifiable indicators

Short-time duty (S2) — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 4 min^{[2; 2026-10-01]}; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 4 min^{[2; 2026-10-01]}.

Rated life — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: Not published. Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: Not published.

Thermal protection — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: Not published. Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: Not published.

IP rating — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: IP44^{[2; 2026-10-01]}; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: IP44^{[2; 2026-10-01]}.

Comparison table
Property	Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpmGeiger AntriebstechnikGB45M-10/15	Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpmGeiger AntriebstechnikGB45M- 20/15
Series & variant axes
Series	PRO.TECline Spindle NHK	PRO.TECline Spindle NHK
TorqueDiffers: 10 Nm vs 20 Nm	10 Nm	20 Nm
Rated speed	15 rpm	15 rpm
Electrical
Rated voltage	230 V^{[2; 2026-10-01]}	230 V^{[2; 2026-10-01]}
Mains frequency	50 Hz^{[2; 2026-10-01]}	50 Hz^{[2; 2026-10-01]}
Power supply type	AC mains^{[2; 2026-10-01]}	AC mains^{[2; 2026-10-01]}
Supply rating (as stated)	230 V~/50 Hz^{[1; 2026-09-23]}	230 V~/50 Hz^{[1; 2026-09-23]}
Rated power inputDiffers: 105 W^{[2; 2026-10-01]} vs 140 W^{[2; 2026-10-01]}	105 W^{[2; 2026-10-01]}	140 W^{[2; 2026-10-01]}
Rated currentDiffers: 0.47 A^{[2; 2026-10-01]} vs 0.63 A^{[2; 2026-10-01]}	0.47 A^{[2; 2026-10-01]}	0.63 A^{[2; 2026-10-01]}
Power factor (cos φ)	> 0.95 ^{[2; 2026-10-01]}	> 0.95 ^{[2; 2026-10-01]}
Inrush current factor	1.2 x^{[2; 2026-10-01]}	1.2 x^{[2; 2026-10-01]}
Cable connection	Fixed cable^{[1; 2026-10-01]}	Fixed cable^{[1; 2026-10-01]}
Drive performance
Rated torqueDiffers: 10 Nm^{[2; 2026-10-01]} vs 20 Nm^{[2; 2026-10-01]}	10 Nm^{[2; 2026-10-01]}	20 Nm^{[2; 2026-10-01]}
Rated speed	15 rpm^{[2; 2026-10-01]}	15 rpm^{[2; 2026-10-01]}
Short-time duty (S2)	4 min^{[2; 2026-10-01]}	4 min^{[2; 2026-10-01]}
Duty type	S2^{[2; 2026-10-01]}	S2^{[2; 2026-10-01]}
Dimensions & mounting
Motor diameter	45 mm^{[2; 2026-10-01]}	45 mm^{[2; 2026-10-01]}
Overall lengthDiffers: 528 mm^{[2; 2026-10-01]} vs 548 mm^{[2; 2026-10-01]}	528 mm^{[2; 2026-10-01]}	548 mm^{[2; 2026-10-01]}
WeightDiffers: ≈ 2.2 kg^{[2; 2026-10-01]} vs ≈ 2.3 kg^{[2; 2026-10-01]}	≈ 2.2 kg^{[2; 2026-10-01]}	≈ 2.3 kg^{[2; 2026-10-01]}
Limits & protection
Limit setting	Mechanical^{[1; 2026-10-01]}	Mechanical^{[1; 2026-10-01]}
Limit range	22 turns^{[2; 2026-10-01]}	22 turns^{[2; 2026-10-01]}
Obstacle detection	No^{[1; 2026-10-01]}	No^{[1; 2026-10-01]}
Environment & protection
IP rating	IP44^{[2; 2026-10-01]}	IP44^{[2; 2026-10-01]}
Noise level	39 dB(A)^{[1; 2026-09-23]}	39 dB(A)^{[2; 2026-10-01]}
Application
Applications	Awning^{[1; 2026-10-01]}, Cassette awning^{[1; 2026-10-01]}, Roller shutter^{[1; 2026-10-01]}, Screen^{[1; 2026-10-01]}	Awning^{[1; 2026-10-01]}, Cassette awning^{[1; 2026-10-01]}, Roller shutter^{[1; 2026-10-01]}, Screen^{[1; 2026-10-01]}
View all 5 variants
Documents	Request datasheet	Request datasheet

Relations and interchangeability

Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm → Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm

Not directly interchangeable

Same product type (tubular motor)
Used for Awning, Cassette awning, Roller shutter, Screen (same)
Ø45 mm (same class)
Speed 15 rpm (same)
230 V (same)
Power supply AC mains (same)
Mains 50 Hz (same)
Limits: Mechanical (same)
Limit turns 22
Protection IP44
Torque 20 Nm is far above 10 Nm
Control system not confirmed
20 mm longer: check the space between brackets

Required changes / checks: Control system not confirmed; 20 mm longer: check the space between brackets

Not checked: crown & drive adapters and motor head; Not checked: brackets; Not checked: remote pairing; Not checked: wiring

Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm → Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm

Not directly interchangeable

Same product type (tubular motor)
Used for Awning, Cassette awning, Roller shutter, Screen (same)
Ø45 mm (same class)
Speed 15 rpm (same)
230 V (same)
Power supply AC mains (same)
Mains 50 Hz (same)
Limits: Mechanical (same)
Length 528 mm
Limit turns 22
Protection IP44
Torque 10 Nm is below the 20 Nm needed
Control system not confirmed

Required changes / checks: Control system not confirmed

Not checked: crown & drive adapters and motor head; Not checked: brackets; Not checked: remote pairing; Not checked: wiring

Same-series variants

Variant axis	Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm	Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm
Torque	10 Nm^{[Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf; 2026-10-01]}	20 Nm^{[Geiger Antriebstechnik PDF catalogue GEIGER_Katalog_04_TECLINE_100W9004_DE.pdf; 2026-10-01]}

Cross-brand alternatives

Wistar motor WSME50-10/13: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, 230 V^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}
Wistar motor WSME50-10/17: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, 230 V^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}
Wistar motor WSME50-10/21: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}, 230 V^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}
Wistar motor WSME50-10/16: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, 120 V^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}
Wistar motor WSME50-10/21: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}, 120 V^{[Wistar motor manufacturer site (product catalog); 2026-10-02]}
Wistar motor WSME50-10/33: 10 Nm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, Ø 45 mm^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}, 120 V^{[Wistar motor manufacturer site (product catalog); 2026-10-01]}

Questions and answers

What supply voltage and frequency does each use?: Rated voltage — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 230 V; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 230 V. Mains frequency — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 50 Hz; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 50 Hz. Power supply type — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: AC mains; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: AC mains.
Which tube diameters do they fit?: Motor diameter — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 45 mm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 45 mm.
What torque and speed is each rated for?: Rated torque — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 10 Nm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 20 Nm. Rated speed — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: 15 rpm; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: 15 rpm.
What protocols and control options does each support?: Limit setting — Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm: Mechanical; Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm: Mechanical.

Sources

↑Geiger Antriebstechnik manufacturer site (product catalog)geiger.deSeries / product line: PRO.TECline Spindle NHKManufacturer-stated · Observed 2026-10-01 · Retrieved 2026-09-23 · Public web pageUsed for: 7041, 7059, 1176, 1182, 7048, 7066, 7047, 7065, 7046, 7064, 1178, 7044, 7045, 7042, 7043, 7062, 7063, 7060, 7061
↑Geiger Antriebstechnik PDF cataloguegeiger.deRated voltage: Spannung: 230V~/50 Hz [GB45M-10/15] (p. 31)Manufacturer-stated · Observed 2026-10-01 · Retrieved 2026-10-01 · Public web pageUsed for: 30717, 30749, 30721, 30753, 30719, 30751, 30729, 30760, 30723, 30754, 30725, 30756, 30727, 30758, 30731, 30762, 30733, 30764, 30740, 30773, 30742, 30775, 30744, 30779, 30739, 30771, 30747, 30781, 30735, 30766, 30737, 30769, 30777

See something wrong? Report an error

Geiger Antriebstechnik PRO.TECline Spindle NHK · 10 Nm · 15 rpm vs Geiger Antriebstechnik PRO.TECline Spindle NHK · 20 Nm · 15 rpm